Fire Alarm

FIRE ALARM SYSTEM

Features

Fire Alarm System is designed to alert us to an emergency so that we can take action to protect ourselves, staff and the general public. They are a part of our everyday routine but often overlooked until there is an emergency at which point, they might just save our lives.
The wide range of FireHub product offers a powerful and sophisticated range of Analogue Addressable, Conventional and Extinguishant Control Panels available intelligent and technically robust.

ADDRESSABLE FIRE ALARM SYSTEM

Features

FH500 Fire Alarm Control Panel
LPCB Approved
Compliance EN54-2 & EN54 4
1 to 4 loop (Expandable upto 6 loops) ∙
Support 254 Devices/One loop (1,016 ideal)
Network up to 512 Node
Programmable Capacity
Zones up to 3000 Sounders
Sounders Groups 1-1000
Other Groups 1001-2000
Built-in 160 LED Zones Indicator

ADDRESSABLE SMOKE DETECTOR

Features

LPCB Approved
Using microprocessor technology with memory capacity up to 10 events
Analogue sending and digital addressing
Provide real time algorithm to the control panel
Smart linear drift compensation
Onsite adjustable parameter
360-degree visual indicator
Removable chamber against dust and small insect
Ancillary remote indicator output

ADDRESSABLE HEAT DETECTOR

Features

The FH-AD102 Heat Detector is reliable for application in places where may have high dust level or smoky environments making a normal smoke detector undesirable.
The unit manufactured base on the sensitivity requirement of EN 54 part 5,
European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs.
The unit incorporates an intelligent processor that provides inbuilt A/D converter, and Self-Diagnosis and History log.

ADDRESSABLE GAS DETECTOR

Features

Fire hub addressable gas detector FH –AD 104 is designed to detect toxic & flammable gases in car parks and tunnels.
It is designed to detect Carbon monoxide (CO),Nitrogen oxide(NO) and Nitrogen Dioxide(No2)
The gas detectors are compatible with EN 50545-1 Standard.

LOOP PASSIVE REPEATER

Features

FireHub LCD Repeater Panel is designed with built-in MCU processor to display exact fire event messages from the control panel and fast relay response with simultaneous audible and visual signal output.
This repeater panel can also program to limit the zone display from All Zones into a particular zone or three adjacent zones through the panel key buttons.
The unit is connected through the communication loop of IGN Intelligent control panel along with the devices and can install up to 254 units per loop.
The repeater panel can be used whenever there is a need to relay information to multipoint informing key personnel.

ADDRESSABLE SMOKE & HEAT COMBINED DETECTOR

Features

The FireHub Addressable Smoke & Heat Detector is the ideal device for most applications due to its spiffing linear response to a wide variety of different types of smoke patterns and combining with heat sensing sensor for temperature response.

ADDRESSABLE INPUT / OUTPUT MODULE

Features

The FH-AD107 Addressable Single Input/output Module is characterized as one input or output volt free relay and control module.
The unit is normally used for overriding equipment such as lift return, door holder, smoke extract fans, air handling unit, auto dialer to fire brigade, BMS and etc.
The unit has built-in feedback signal feature, according to the pre-configured inter-face module command fire scenario, the alarm controller send out start command to the equipment required to start.
After receiving the command, output module enables its relay to change state. Once the module is under control and operated a confirmation signal will be sending back to the alarm controller.
In addition, the unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the input signal line.

ADDRESSABLE ZONE MODULE

Features

FH-AD107 Addressable Zone Monitor unit is an addressable inter-face module, which will integrate conventional detectors or conventional manual call points to addressable system.
When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address.
The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc.
It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR). The fault massage includes open circuit, short circuit or any removal of the detectors.

ADDRESSABLE ISOLATOR MODULE

Features

The FH-AD108 manufactured base on the requirement of EN 54 part 17, European Standard.
In the event of short circuit on the detection loop the IM-8414 Isolators either side of the loop will detect the problem and open circuit and isolates the faulty part of the loop, enabling other devises on the unaffected part of the loop to operate normally.
The module will continue to monitor for the fault to be repaired, once the fault is cleared the isolator will automatically reinstate the effected part of the loop.

ADDRESSABLE MANUAL CALL POINT

Features

The Addressable Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool.

ADDRESSABLE SOUNDER STROBE

Features

The Addressable Sounder & Strobe are alarm warning device used to notify per-sons in the vicinity of the occurrence fire emergency in order the person to take appropriate measures.
The unit adopt multi-application device starting from the types, parameters and wiring layout in single unit.
The AVI-6401 can change into different alarm warning types such as sounder-strobe type, sounder type or strobe type using programming tool.
In addition, parameters can be configured according to the requirement which include alarm tone from 17 different tones, single address or dual address mode and also setting of power mode to low current consumption in a simple programming.

CONVENTIONAL FIRE ALARM & DETECTION SYSTEM

Features

High and reliable operation performance.
Conventional panel series available for 2/4/8/49 detection zones.
Fully programmable using simple menu options
Compatible with wide range of conventional devices
Keypad entry to a wide range of engineering functions, including self-test, zone test, zone delay, non-latching zone, evacuation override
LED indications available for short or open circuit of detection zone, sounder circuit and fire alarm outputs Fault buzzer mute facility
Up to four programmable supervised sounder circuits
Reserved repeater panel interface for fire alarm indication of multiple zones
Three access levels settable via a key switch and internal switch
2-wire system to reduce installation cabling and installer friendly
LPCB Approval in compliance with EN54-2

CONVENTIONAL DETECTORS

Features

Intelligent drift compensation to the variation of external environment (temperature,humidity, dust, static) Can accurately detect the chronic fire happened in 24 hours
Intelligent algorithm and judgment, warning reminder for dirty and cleaning
Filter designed in both software and hardware, enhance the ability of anti-interference
PCB board inside is sealed with full protection
Unique chamber design for protection against dust, insects and other external interferences
Talented design of structure without a single screw
Compatible with a wide range of conventional panel or interface

CONVENTIONAL HEAT DETECTORS

Features

Filter designed in both software and hardware, enhance anti-interference ability.
PCB board onside is sealed with full protection.
Use thermal sensor with high sensitivity, enhance quick response to variation of temperature.
Talented design structure without a single screw.
Compatible with a wide range of conventional panel or interface.
LPCB Approval in compliance with EN54-5.

CONVENTIONAL COMBINED HEAT AND SMOKE DETECTORS

Features

Improved dust protection and detection accuracy
Dual LEDs for 360-degree visibility
Low current consumption and wide voltage range
Bases fitted with shorting spring to permit easy maintenance

CONVENTIONAL MANUAL CALL POINT

Features

Transparent plastic window on the front for activation
No glass breaking activation
Resettable by a special key
LED indicator provides the status of device.
Available for installation of either wall-mount or flush –mount.
Compatible with a wide range of conventional panel or interface.
LPCB approval in compliance with EN54-11

CONVENTIONAL SOUNDER STROBE

Features

Alert Sound and flash combined in one unit
A select of 16 different tones
Using ultra bright LEDs as source for light indication
Fully synchronized operating frequencies and LED beacon
Low power consumption
Plug-in structure design for easy installation
Compatible with a wide range of conventional panel or interface

CONVENTIONAL FIRE ALARM BELL

Features

Electricity insulating base
Can accept 2.5mm terminal cables
Fitted with 2 series diodes for fault monitoring
EN-54-3

(+971) 4 210 2999

Give Us A Call

info@firehub.ae

Drop Us a Line

Bin Shabib Mall

Al Qusais - Duabi, UAE

Your Trusted Source for Firing Equipment – Reliable, durable solutions for all your firing needs..

Quick Links

Useful Links

Subscribe Our Newsletter

Stay updated with our latest news, exclusive offers, and insights by subscribing to our newsletter. Join our community and never miss out on important updates and promotions.